Author Topic: Roddio/Onoff Adapter Extraction??  (Read 824 times)

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Roddio/Onoff Adapter Extraction??
« on: January 17, 2019, 11:49:31 AM »
Does anyone know how to remove the Adapter that sits in the Head.
Shafts been removed no problems ...
I’m wanting to change the sleeve/adapter
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

95124hacker

  • Super Ho
  • ***
  • Posts: 672
  • Karma: +2/-2
Re: Roddio/Onoff Adapter Extraction??
« Reply #1 on: January 17, 2019, 12:53:40 PM »
Didn’t I read that it’s epoxied in place after finding the desired orientation? Kinda like the old Ping TiSI drivers. Adjustable only once...

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #2 on: January 17, 2019, 01:05:11 PM »
Didn’t I read that it’s epoxied in place after finding the desired orientation? Kinda like the old Ping TiSI drivers. Adjustable only once...

Yup it is but I’m not sure if you remove the Sole plate and heat from inside or warm from outside?

Seems very stuck to me!!
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #3 on: January 17, 2019, 03:15:07 PM »
Starting to think this adapter is “threaded” and actually screws in?
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

wmclarenf1

  • Every Saint a Past...
  • Ultra Ho
  • *****
  • Posts: 5,814
  • Karma: +18/-111
  • .!..
Re: Roddio/Onoff Adapter Extraction??
« Reply #4 on: January 17, 2019, 07:45:33 PM »
D, your on going adventure with this is hilarious....
Drivers : AbroadDF570BAngel-Crazy435Angel5-DesignTuningIDVTK03-GTD455Crazy9Dia-Itobori7D
UTs : A-GrindBX-H-Itobori-ModartMA01H-ProceedTi
Irons : GrindStudio-Itobori-PXG0
Wedges : GrindStudio-Orion-PXG
Putters : ArGolf-Artisan-Benock-BPutters-Machine-Mannkrafted-Masda-Nead-Slighter-TPMills-Xenon

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #5 on: January 18, 2019, 12:42:45 AM »
D, your on going adventure with this is hilarious....

Hmmmm
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

Nolixul

  • Fledgling Ho
  • *
  • Posts: 86
  • Karma: +1/-2
Re: Roddio/Onoff Adapter Extraction??
« Reply #6 on: January 18, 2019, 03:50:32 AM »
Looking at the pics on the Roddio site, the pictures of their adaptor do seem to show some threading. However I would be sure that, whatever, it will be epoxied too.

In this case it would be best to heat from outside, and also through any access plate, and then use a spiral flute screw extractor to grip inside the sleeve and remove it (spiraling in the same direction needed to unscrew any possible threading). It shouldn't take that much heat as the epoxy will already be weakened from the heat applied during shaft removal.

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #7 on: January 18, 2019, 05:15:55 AM »
Looking at the pics on the Roddio site, the pictures of their adaptor do seem to show some threading. However I would be sure that, whatever, it will be epoxied too.

In this case it would be best to heat from outside, and also through any access plate, and then use a spiral flute screw extractor to grip inside the sleeve and remove it (spiraling in the same direction needed to unscrew any possible threading). It shouldn't take that much heat as the epoxy will already be weakened from the heat applied during shaft removal.

Thanks
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

95124hacker

  • Super Ho
  • ***
  • Posts: 672
  • Karma: +2/-2
Re: Roddio/Onoff Adapter Extraction??
« Reply #8 on: January 18, 2019, 10:14:40 AM »
Isn’t the sleeve supposed to rotate in the head (giving it your adjustments for lie, loft, face angle)? Then making it screwed in doesn’t make sense because it will only be tight in one orientation. I think those ridges are additional surface areas for the epoxy bond. That’s just my design engineering rationalization.

Nolixul

  • Fledgling Ho
  • *
  • Posts: 86
  • Karma: +1/-2
Re: Roddio/Onoff Adapter Extraction??
« Reply #9 on: January 18, 2019, 11:00:43 AM »
The point is that even if there is no threading (and its just grooves or ridges), you would still use a spiral flute extractor to remove the sleeve. Therefore, just in case, the extractor can be turned with the possible threading in mind.

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #10 on: January 18, 2019, 11:27:00 AM »
I guess a good pair of grips would work too!!
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #11 on: January 18, 2019, 12:21:01 PM »
Ok so update

Getting really pissed off with this Stupid Head.

Looks like it’s going back to Japan!!

If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

95124hacker

  • Super Ho
  • ***
  • Posts: 672
  • Karma: +2/-2
Re: Roddio/Onoff Adapter Extraction??
« Reply #12 on: January 18, 2019, 08:22:33 PM »
Maybe I missed it...  why are you removing the adapter since you’ve already removed the shaft?  Trying to change the face angle, lie or loft?

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #13 on: January 18, 2019, 09:11:25 PM »
Maybe I missed it...  why are you removing the adapter since you’ve already removed the shaft?  Trying to change the face angle, lie or loft?
yup
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face

DaleUK

  • Ultra Ho
  • *****
  • Posts: 3,682
  • Karma: +11/-14
  • Never trust an Atom,they make up everything!!
Re: Roddio/Onoff Adapter Extraction??
« Reply #14 on: January 19, 2019, 02:24:41 AM »
It’s out!!!
It turns out( no pun intended ) that you do need to turn as tho removing a screw!!

Well that made life hard for an hour or So

Let the new build begin!!
If your not part of the Solution , then your part of the Problem!!

Rest in Peace “Mi Amigo”

I got a Gibson
Without a case
But I can't get that even tanned look on my face