Author Topic: Accra iron shafts  (Read 2988 times)

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Accra iron shafts
« on: July 31, 2018, 09:51:53 AM »
Has anyone tested the latest Accra iron shafts, with the Ti mesh at the tip?
I've tried the precursor (Hybrex) which I thought was very good, just haven't had the chance with the latest.
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #1 on: August 08, 2018, 02:49:23 PM »
Ok, so I bought some Tour 110i TiMesh......going in a set of OnOff Forged 2011. Hopefully these play similar to the 2013 with SF i95 but with slightly lower launch. Fingers crossed.
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

Shacco

  • Ultra Ho
  • *****
  • Posts: 1,533
  • Karma: +8/-13
Re: Accra iron shafts
« Reply #2 on: August 08, 2018, 03:51:06 PM »
Report when you played it. That shaft looks nice.
Driver: Callaway Epic Subzero
3FW: Kamui TP-XF
3 and 4 ute: Romaro I-brid Chapter2
5-PW: PRGR RS Forged
GW: 50* CGS Orion Spy Type S
SW: 2007 Yamaha InpresX Black
LW: 60° Edel DGR
Putter: Yes! Tracy 2

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #3 on: August 08, 2018, 04:29:10 PM »
Report when you played it. That shaft looks nice.

Will do mate.
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 4,243
  • Karma: +16/-46
  • The world needs ditch diggers too!!!
Re: Accra iron shafts
« Reply #4 on: August 17, 2018, 07:53:27 PM »
How are they Ian?  That is a sweet setup bro!  Anxious to hear, I had a di once with an Accra shaft and it was delightful!
12compact mid/Lunar5+
16.5baffy/Lunar6
20hyute/lunar7
5-P-RoddioPC/lunar8
Q,R,S,T Roddio-wedge/Lunar9
EXO odyssey
AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #5 on: August 18, 2018, 01:02:03 AM »
How are they Ian?  That is a sweet setup bro!  Anxious to hear, I had a di once with an Accra shaft and it was delightful!

Took a little longer to get the irons, so maybe another week for onoff/accra combo to surface
😢
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 4,243
  • Karma: +16/-46
  • The world needs ditch diggers too!!!
Re: Accra iron shafts
« Reply #6 on: August 31, 2018, 08:08:06 PM »
....
12compact mid/Lunar5+
16.5baffy/Lunar6
20hyute/lunar7
5-P-RoddioPC/lunar8
Q,R,S,T Roddio-wedge/Lunar9
EXO odyssey
AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #7 on: September 01, 2018, 01:58:21 AM »
....

And so am I....... 😈
I'm a little reluctant to break up the onoff's. I don't understand how I can hit these so well with a regular flex 65g shaft but they are suprisingly/accurate stable.
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

wmclarenf1

  • Every Saint a Past...
  • Ultra Ho
  • *****
  • Posts: 5,880
  • Karma: +18/-111
  • .!..
Re: Accra iron shafts
« Reply #8 on: September 01, 2018, 02:03:29 AM »
....

And so am I....... 😈
I'm a little reluctant to break up the onoff's. I don't understand how I can hit these so well with a regular flex 65g shaft but they are suprisingly/accurate stable.

Time to accept you ain't all you make out to be... ;D

That aside, Accra is a Jv between Mamiya and UST.  I played  their driver and fw shafts a long while back.  Very stable shafts.
« Last Edit: September 01, 2018, 02:05:26 AM by wmclarenf1 »
Drivers : Crazy435Angel5-DesignTuningDiamondSpeeder-GTD4557D-Itobori7D
UTs : A-GrindBX-H-Itobori-ModartMA01H-ProceedTi
Irons : GTD-GrindStudio-Itobori-PXG
Wedges : GrindStudio-Itobori-Orion-PXG
Putters : ArGolf-Artisan-BPutters-Machine-Mannkrafted-Masda-Nead-Slighter-TPMills-Xenon

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #9 on: September 01, 2018, 02:26:16 AM »
....

And so am I....... 😈
I'm a little reluctant to break up the onoff's. I don't understand how I can hit these so well with a regular flex 65g shaft but they are suprisingly/accurate stable.

Time to accept you ain't all you make out to be... ;D

That aside, Accra is a Jv between Mamiya and UST.  I played  their driver and fw shafts a long while back.  Very stable shafts.

Hahaha you could be right though. Every lighter graphite I've played I've gotten on really well with them; Fubuki ax, Attas 7,  Bassara......but I've also gotten on well with the heavier ones too, so I'm confused.

The Accra's will definitely be installed this week 👍 or maybe just the 6i for testing. 😁
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 4,243
  • Karma: +16/-46
  • The world needs ditch diggers too!!!
Re: Accra iron shafts
« Reply #10 on: September 02, 2018, 08:06:08 PM »
Haha, I've had the same experience...you have significantly more clubhead speed that me but I like the heavier shafts 90-110 gram range usually but went to the lighter bangvoo 82-92 gram range and just got along great with them...now the 100 gram shafts feel heavy...

Seriously though, those light onoff iron and ute shafts are resilient...I was hitting the stock onoff 70g stiff shafts my '13 forged set came with way better than after replacing them with Attas 10...
12compact mid/Lunar5+
16.5baffy/Lunar6
20hyute/lunar7
5-P-RoddioPC/lunar8
Q,R,S,T Roddio-wedge/Lunar9
EXO odyssey
AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #11 on: September 03, 2018, 01:44:52 AM »
Seriously though, those light onoff iron and ute shafts are resilient...I was hitting the stock onoff 70g stiff shafts my '13 forged set came with way better than after replacing them with Attas 10...

Don't tell me that...
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,468
  • Karma: +4/-25
Re: Accra iron shafts
« Reply #12 on: September 12, 2018, 12:12:39 PM »
So I finally have these shafted up. Look great, love the TiMesh 3/4 way down the shaft, and they feel good but they go super high. One of the highest I've hit. These remind me of Quadra 100i. The OnOff 63g stock graphite was a lot lower than these!
With the huge carry, I think these are a little longer than OnOff,again reminding me of the Quadra's.
One thing these are is stable, slightly more so than the Onoff's, and similar to DGL and Steelfiber. You can certainly step on these and send them in to the Stratosphere....

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Driver: TM Original One 11.5° + Tensei CK Pro Blue 80tx.
HY: Ping G400 17° + Oban White 95x.
DI:  Epon 903 20 & 23 + OTi120x
Irons: Epon AF-Tour MB 5i - PW + OTi120x
Wedges: Epon 208 KGX 53°/59° + OTi110x.
Putter: SeeMore SB1 + Accra FX300.

nobwas

  • Platinum Ho
  • ****
  • Posts: 1,307
  • Karma: +9/-6
Re: Accra iron shafts
« Reply #13 on: September 12, 2018, 05:51:51 PM »
I really like the look of these shafts.
but I don't know if I want anything that goes that high.

Do you know if these are essentially the same as the 100i?

https://www.ebay.com/itm/7PC-NEW-UNCUT-ACCRA-100T-Stiff-Flex-GRAPHITE-IRON-SHAFTS-370/372425908882?hash=item56b6506292:g:gXsAAOSwWvpbjsXL
DR: Modart MA01D+R / Diamana W
FW: Modart MA01F / Diamana 'Ahina
UT: Modart MA01H / Crazy STP
IR:  Epon AF-505/SUS316 / Modus 125
WG: MG S-01 / Modus Wedge 125
PT:  Ping Vault 2.0 CRAZ-E H ( in trial mode )

MBBG

  • Administrator
  • Ultra Ho
  • *****
  • Posts: 4,851
  • Karma: +69/-1492
    • JDM Clubhouse
Re: Accra iron shafts
« Reply #14 on: September 12, 2018, 09:13:44 PM »
Maybe you’re like me, Ian. Shafts that are suppose to be high launch go low and draw for me and shafts that are supposed to be low launch go high and straight/fade.

Just love it back a couple balls’ width in you stance and swing 3/4 and it’ll be money
S Yard T.388 Kuro Kage XM 70x
TaylorMade Original One 13.5* HZRDUS Green
Titleist TS2 16.5* Kuro Kage XM 80x
Mizuno MP-20 HMB 3-6 MP-20 Blade 7-P DG AMT
Mizuno T20 50 and 55 S400 TI
Callaway PM Grind 60
PXG Operator LTD Edition “Darkness”