Author Topic: Accra iron shafts  (Read 490 times)

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Accra iron shafts
« on: July 31, 2018, 09:51:53 AM »
Has anyone tested the latest Accra iron shafts, with the Ti mesh at the tip?
I've tried the precursor (Hybrex) which I thought was very good, just haven't had the chance with the latest.
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #1 on: August 08, 2018, 02:49:23 PM »
Ok, so I bought some Tour 110i TiMesh......going in a set of OnOff Forged 2011. Hopefully these play similar to the 2013 with SF i95 but with slightly lower launch. Fingers crossed.
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

Shacco

  • Platinum Ho
  • ****
  • Posts: 1,437
  • Karma: +8/-13
Re: Accra iron shafts
« Reply #2 on: August 08, 2018, 03:51:06 PM »
Report when you played it. That shaft looks nice.
Driver: Callaway Epic Subzero
3FW: Kamui TP-XF
3 and 4 ute: Romaro I-brid Chapter2
5-PW: PRGR RS Forged
GW: 50* CGS Orion Spy Type S
SW: 2007 Yamaha InpresX Black
LW: 60° Edel DGR
Putter: Odyssey Milled Collection 6M

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #3 on: August 08, 2018, 04:29:10 PM »
Report when you played it. That shaft looks nice.

Will do mate.
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 3,827
  • Karma: +14/-44
  • The world needs ditch diggers too!!!
Re: Accra iron shafts
« Reply #4 on: August 17, 2018, 07:53:27 PM »
How are they Ian?  That is a sweet setup bro!  Anxious to hear, I had a di once with an Accra shaft and it was delightful!
155/BasiAlpha60-x
Spoon15.6/RoddioF7-s
19/23 hybridUT/Lunar8/Stella8
505 5-P + 49 705 Muziik bangvoo-s
213 53/60/Muziik bangvoo-s
Oworks 2ball-spam
Titliest AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #5 on: August 18, 2018, 01:02:03 AM »
How are they Ian?  That is a sweet setup bro!  Anxious to hear, I had a di once with an Accra shaft and it was delightful!

Took a little longer to get the irons, so maybe another week for onoff/accra combo to surface
😢
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 3,827
  • Karma: +14/-44
  • The world needs ditch diggers too!!!
Re: Accra iron shafts
« Reply #6 on: August 31, 2018, 08:08:06 PM »
....
155/BasiAlpha60-x
Spoon15.6/RoddioF7-s
19/23 hybridUT/Lunar8/Stella8
505 5-P + 49 705 Muziik bangvoo-s
213 53/60/Muziik bangvoo-s
Oworks 2ball-spam
Titliest AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #7 on: September 01, 2018, 01:58:21 AM »
....

And so am I....... 😈
I'm a little reluctant to break up the onoff's. I don't understand how I can hit these so well with a regular flex 65g shaft but they are suprisingly/accurate stable.
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

wmclarenf1

  • Every Saint a Past...
  • Ultra Ho
  • *****
  • Posts: 5,310
  • Karma: +16/-110
  • .!..
Re: Accra iron shafts
« Reply #8 on: September 01, 2018, 02:03:29 AM »
....

And so am I....... 😈
I'm a little reluctant to break up the onoff's. I don't understand how I can hit these so well with a regular flex 65g shaft but they are suprisingly/accurate stable.

Time to accept you ain't all you make out to be... ;D

That aside, Accra is a Jv between Mamiya and UST.  I played  their driver and fw shafts a long while back.  Very stable shafts.
« Last Edit: September 01, 2018, 02:05:26 AM by wmclarenf1 »
Drivers : AbroadDF570-Crazy435-GTD455-GrandistaRS-D-Itobori-ModartDS-ProceedIX
UTs : Itobori-ModartMA01H-ProceedTi-PXG317
Irons : GrindStudioProto-RoddioMeisterM-ModartCBC-PXG311T
Wedges : GrindStudio-Modart-Orion
Putters : Benock-BPutters-Machine-Masda-Nead-Slighter-TPMills-Xenon
Ball : Chrome

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #9 on: September 01, 2018, 02:26:16 AM »
....

And so am I....... 😈
I'm a little reluctant to break up the onoff's. I don't understand how I can hit these so well with a regular flex 65g shaft but they are suprisingly/accurate stable.

Time to accept you ain't all you make out to be... ;D

That aside, Accra is a Jv between Mamiya and UST.  I played  their driver and fw shafts a long while back.  Very stable shafts.

Hahaha you could be right though. Every lighter graphite I've played I've gotten on really well with them; Fubuki ax, Attas 7,  Bassara......but I've also gotten on well with the heavier ones too, so I'm confused.

The Accra's will definitely be installed this week 👍 or maybe just the 6i for testing. 😁
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 3,827
  • Karma: +14/-44
  • The world needs ditch diggers too!!!
Re: Accra iron shafts
« Reply #10 on: September 02, 2018, 08:06:08 PM »
Haha, I've had the same experience...you have significantly more clubhead speed that me but I like the heavier shafts 90-110 gram range usually but went to the lighter bangvoo 82-92 gram range and just got along great with them...now the 100 gram shafts feel heavy...

Seriously though, those light onoff iron and ute shafts are resilient...I was hitting the stock onoff 70g stiff shafts my '13 forged set came with way better than after replacing them with Attas 10...
155/BasiAlpha60-x
Spoon15.6/RoddioF7-s
19/23 hybridUT/Lunar8/Stella8
505 5-P + 49 705 Muziik bangvoo-s
213 53/60/Muziik bangvoo-s
Oworks 2ball-spam
Titliest AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #11 on: September 03, 2018, 01:44:52 AM »
Seriously though, those light onoff iron and ute shafts are resilient...I was hitting the stock onoff 70g stiff shafts my '13 forged set came with way better than after replacing them with Attas 10...

Don't tell me that...
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,050
  • Karma: +3/-24
Re: Accra iron shafts
« Reply #12 on: September 12, 2018, 12:12:39 PM »
So I finally have these shafted up. Look great, love the TiMesh 3/4 way down the shaft, and they feel good but they go super high. One of the highest I've hit. These remind me of Quadra 100i. The OnOff 63g stock graphite was a lot lower than these!
With the huge carry, I think these are a little longer than OnOff,again reminding me of the Quadra's.
One thing these are is stable, slightly more so than the Onoff's, and similar to DGL and Steelfiber. You can certainly step on these and send them in to the Stratosphere....

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Driver: jBEAM Glorious 10.5° + Motore VT 7.0x, 45.5".
FW: jBEAM Glorious 15.5° + Kuro Kage Proto 70x, 43".
HY: Ping G20 20°/23°/27° + Accra FX200/300h, 39".
Irons: OnOff Forged 6i - GW + Accra Tour 110i TiMesh.
Wedges: Miura Giken WMF-06 53°/58° + Black Gold x.
Putter: Rife Barbados.

nobwas

  • Platinum Ho
  • ****
  • Posts: 1,310
  • Karma: +9/-5
Re: Accra iron shafts
« Reply #13 on: September 12, 2018, 05:51:51 PM »
I really like the look of these shafts.
but I don't know if I want anything that goes that high.

Do you know if these are essentially the same as the 100i?

https://www.ebay.com/itm/7PC-NEW-UNCUT-ACCRA-100T-Stiff-Flex-GRAPHITE-IRON-SHAFTS-370/372425908882?hash=item56b6506292:g:gXsAAOSwWvpbjsXL
DR: Modart MA01D+R / Diamana W
FW: Modart MA01F / Diamana 'Ahina
UT: Modart MA01H / Crazy STP
IR:  Epon AF-505/SUS316 / Modus 125
WG: MG S-01 / Modus Wedge 125
PT:  Ping Vault 2.0 CRAZ-E H ( in trial mode )

MBBG

  • Administrator
  • Ultra Ho
  • *****
  • Posts: 4,682
  • Karma: +69/-1201
    • JDM Clubhouse
Re: Accra iron shafts
« Reply #14 on: September 12, 2018, 09:13:44 PM »
Maybe you’re like me, Ian. Shafts that are suppose to be high launch go low and draw for me and shafts that are supposed to be low launch go high and straight/fade.

Just love it back a couple balls’ width in you stance and swing 3/4 and it’ll be money
Taylormade ‘16 M2 Tour Issue Rogue 125 60TS
Ping G400 3 Wood UST Chrome
RomaRo Type R 18* Nunchuk .370
Srixon U45 Aero i95
Epon 705 Aero i110
Forged Vokey 52F/56K Modus 125 Wedge
Callaway PM 60*
Odyssey SaberTooth (cheater putter)