Author Topic: Fourteen tc UC716 driving iron/ute  (Read 508 times)

tsupo67

  • Ultra Ho
  • *****
  • Posts: 1,865
  • Karma: +7/-11
Fourteen tc UC716 driving iron/ute
« on: July 17, 2018, 08:30:07 PM »
 Might have raved about this before but  anyway......

Anyone looking for a VERY powerfull long  drving iron/ute  with  ONSET  shud take a long  hard peek at this, its a brute,  I have the 18* 1iron  and its really really good.  hit mid high (yes!, high ,  much higher  than my 1iron  or 3 iron )  and its  anti left as you cud ever go, mine is hafted with an NS105s. perfect match really.  replacement for the tight short holes that you umm and ahhh over a driver with, not good off the ground, loft is too low and  head is too big, its a driver alt.
the 21 and 24   are for the ground and look much easier to hit with stock shaft.
 the head is a mini driver style not iron so it seesm to be a bette fit for my eye off the tee. its taking the driving iron spot which I  thought wud never happen but is.


 high  recco!
prgr egg  7* ...diamana aliislei 83s
callaway erc fusion 3w 15*...NS 950s fw
fourteen 716tu   DI 18*...NS 105s
masda mb 3/pw.....NS 120x
prgr nabla id 52*. NS WV125s Yamaha raw black  56*....NS wv 125s
fourteen mt 28 60*....NS 950s
benock Enzo mallet
tourstage x-01z

wmclarenf1

  • Every Saint a Past...
  • Ultra Ho
  • *****
  • Posts: 5,481
  • Karma: +16/-111
  • .!..
Re: Fourteen tc UC716 driving iron/ute
« Reply #1 on: July 17, 2018, 08:42:41 PM »
Top shape is like the Cleveland halo
Drivers : Crazy435Angel5-GTD455Crazy9-ItoboriXanadu-ProceedIXBurningAngel
UTs : Itobori-ModartMA01H-ProceedTi-PXG0317
Irons : GrindStudioProto-RoddioMeisterM-ModartCBC-PXG0311T
Wedges : GrindStudio-Orion-PXG
Putters : ArGolf-Benock-BPutters-Machine-Masda-Nead-PXG-Slighter-TPMills-Xenon
Ball : Chrome

tsupo67

  • Ultra Ho
  • *****
  • Posts: 1,865
  • Karma: +7/-11
Re: Fourteen tc UC716 driving iron/ute
« Reply #2 on: October 21, 2018, 05:00:22 AM »
Ha what anload of shite i wrote earlier.
This thing is a fkn hamer!!!

Just got back from weekend in the mountains golfing today short   par 5, 505y
Hit this off the deck twice from230 ish  hit the gren stuck and made 2  eagles  one one hole!
Low piercing cut landed bit and stuck 6feet away.

U can  hit this from the deck piece of  Psss
Its a riper bought the 21 to got with it for longer par 3s  wil reshaft it asap.

Blew me away today.

Lock em up im done for utes of all kinds this is THE winner
From the tee  its brutal


prgr egg  7* ...diamana aliislei 83s
callaway erc fusion 3w 15*...NS 950s fw
fourteen 716tu   DI 18*...NS 105s
masda mb 3/pw.....NS 120x
prgr nabla id 52*. NS WV125s Yamaha raw black  56*....NS wv 125s
fourteen mt 28 60*....NS 950s
benock Enzo mallet
tourstage x-01z

freehb

  • The world needs ditch diggers too...
  • Ultra Ho
  • *****
  • Posts: 3,937
  • Karma: +15/-46
  • The world needs ditch diggers too!!!
Re: Fourteen tc UC716 driving iron/ute
« Reply #3 on: October 21, 2018, 06:00:29 AM »
Reminds me a bit of the egglets but the onset makes them tougher...
11.2*155/Basileus Alpha 60x
16.5baffy/Lunar6
21hyute/lunar7
4-P 505, 705A/muziikbangvoo
213 53.5/60/muziikbangvoo
EXO odyssey ts
Titliest AVX

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,179
  • Karma: +4/-24
Re: Fourteen tc UC716 driving iron/ute
« Reply #4 on: October 21, 2018, 06:46:52 AM »
Hhhhmmmm.
Driver: jBEAM Glorious 10.5* + Motore VT 7.0x, 45.5", Superstroke.
HY: Fourteen UT716 1i/3i/5i + Thump h90x, 39"-42", Superstroke.
Irons: OnOff Forged 6i - PW + Accra Tour 110 Ti Mesh, Superstroke.
Wedges: Epon Tour 51*/57* + Accra Tour 110/125 Ti Mesh, Superstroke.
Putter: Rife Barbados, Garsen.

tsupo67

  • Ultra Ho
  • *****
  • Posts: 1,865
  • Karma: +7/-11
Re: Fourteen tc UC716 driving iron/ute
« Reply #5 on: October 21, 2018, 08:38:48 PM »
no not at all...
 on the range I always strugle with it but on course,  fk me I cant believe ive  not gone it earlier, its a 100% er now , this and my 5 wood awill have permanent  places In the bag, and I rotate depening on course now.

god that leaves the saqra looking for a spot................................

sigh

such troubles one has to keep an even keel!

 
prgr egg  7* ...diamana aliislei 83s
callaway erc fusion 3w 15*...NS 950s fw
fourteen 716tu   DI 18*...NS 105s
masda mb 3/pw.....NS 120x
prgr nabla id 52*. NS WV125s Yamaha raw black  56*....NS wv 125s
fourteen mt 28 60*....NS 950s
benock Enzo mallet
tourstage x-01z

spoon

  • Always Ho'ing crew
  • Global Moderator
  • Ultra Ho
  • *****
  • Posts: 2,395
  • Karma: +10/-15
  • Always hoing around.
Re: Fourteen tc UC716 driving iron/ute
« Reply #6 on: October 23, 2018, 09:41:16 PM »
Top shape is like the Cleveland halo

Thats exactly what i thought
Ping g400 FEX65S
Gfield 4w Fex 65s
Epon 901 19* Crazy CBI 80s
Epon 901 22* Fex DGL90s
Epon 705 6-pw Fex DGL90s
Epon 705 Aw Diamana OT 105s,  TW /54/58
G-filed Leap M

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,179
  • Karma: +4/-24
Re: Fourteen tc UC716 driving iron/ute
« Reply #7 on: October 24, 2018, 01:40:14 AM »
OK, I'm gonna try these out...
Driver: jBEAM Glorious 10.5* + Motore VT 7.0x, 45.5", Superstroke.
HY: Fourteen UT716 1i/3i/5i + Thump h90x, 39"-42", Superstroke.
Irons: OnOff Forged 6i - PW + Accra Tour 110 Ti Mesh, Superstroke.
Wedges: Epon Tour 51*/57* + Accra Tour 110/125 Ti Mesh, Superstroke.
Putter: Rife Barbados, Garsen.

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,179
  • Karma: +4/-24
Re: Fourteen tc UC716 driving iron/ute
« Reply #8 on: November 01, 2018, 01:18:09 PM »
Quick range session
1i......doubt I'll be keeping the it. JBEAM Glorious 3w is just sooooo easy to hit from the tee, and longer. Face height is very deep compared to the jBEAM. Need to tee it higher which I couldn't do at the range.

3i.....has every chance to stay in the bag. High and straight from the tee. My Ping G20 20/Accra combo is a fade machine, which is surprising given the offset. Onoff Prospec I seemed to hit thin more than the other two, so this could be on the chopping block.

5i.......unsure. Again my Ping G20 27/Accra combo slightly favours a fade, where as the Fourteen was a bit of both, just higher. My OnOff 5i was very similar to the Fourteen, just slightly lower.

I might put the Thump from the 1i into the 5i and see how that goes.

More testing to be done, including on a course and on a launch monitor.

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]

[ Guests cannot view attachments ]
Driver: jBEAM Glorious 10.5* + Motore VT 7.0x, 45.5", Superstroke.
HY: Fourteen UT716 1i/3i/5i + Thump h90x, 39"-42", Superstroke.
Irons: OnOff Forged 6i - PW + Accra Tour 110 Ti Mesh, Superstroke.
Wedges: Epon Tour 51*/57* + Accra Tour 110/125 Ti Mesh, Superstroke.
Putter: Rife Barbados, Garsen.

tsupo67

  • Ultra Ho
  • *****
  • Posts: 1,865
  • Karma: +7/-11
Re: Fourteen tc UC716 driving iron/ute
« Reply #9 on: November 01, 2018, 09:12:15 PM »
thump is an extremely sturdy shaft.... might do u  good to change it  about.
in the 5i it wud be  exceptional.

so softer In the 1i  and yes u can tee it higher.

steel shafts in these are exceptional   modus 105  I have ,its perfect  for me
prgr egg  7* ...diamana aliislei 83s
callaway erc fusion 3w 15*...NS 950s fw
fourteen 716tu   DI 18*...NS 105s
masda mb 3/pw.....NS 120x
prgr nabla id 52*. NS WV125s Yamaha raw black  56*....NS wv 125s
fourteen mt 28 60*....NS 950s
benock Enzo mallet
tourstage x-01z

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,179
  • Karma: +4/-24
Re: Fourteen tc UC716 driving iron/ute
« Reply #10 on: November 03, 2018, 08:44:49 AM »
9 hole test yesterday. 2 shots

The 1i was only 10 yards short of the Glorious 3w on a straight hit, but it was the other way around on a slight fade. Glorious felt and sounded better.

The 3i on a well struck straight hit was in between the OnOff (longest) and the G20 (shortest), but there was only 5-10yds between them all. Both the the Fourteen and OnOff were very forgiving when hit low on the face, to the point where the Fourteen managed to get on a 245yd hole when it pitched at least 70yds before that! The G20 not so much. Lost a lot of distance on a thin shot.

The 5i needs a grip change as it's very smooth. That being said it wasn't short, but it was no longer than my OnOff 5i and my G20. Probably the most forgiving of the three too. I suppose I'm just looking for more accuracy with this club and I think that the Fourteen could be that club.....but the Ping is close....but the OnOff feels great. Onoff 5i
Driver: jBEAM Glorious 10.5* + Motore VT 7.0x, 45.5", Superstroke.
HY: Fourteen UT716 1i/3i/5i + Thump h90x, 39"-42", Superstroke.
Irons: OnOff Forged 6i - PW + Accra Tour 110 Ti Mesh, Superstroke.
Wedges: Epon Tour 51*/57* + Accra Tour 110/125 Ti Mesh, Superstroke.
Putter: Rife Barbados, Garsen.

ian-500

  • Ultra Ho
  • *****
  • Posts: 3,179
  • Karma: +4/-24
Re: Fourteen tc UC716 driving iron/ute
« Reply #11 on: December 02, 2018, 05:03:12 PM »
Like Stu, WHAT AM I TALKING ABOUT, these are awesome. Easily the best hybrids I've hit. Aren't going anywhere soon. I even tested the 1i (16*) off the deck and yes, no problem to hit clean. Mine are swing weighted at, and get this, E8!
Have to give a mention to the Diamana Thump h90x shafts. Truly fantastic for my swing at the moment. Mid height and a flat penetrating flight. Seem to be low spinners in to wind. Looking at changing the Tour AD105x for the equivalent Thump. I have changed the grips to midsize which equals a straight to a slight fade for me. No good in a left to right wind but just drop your right leg back and Booooom!
Shot 78 today in terrible weather. My lowest is 77 so I'm on a charge......but I'm still off 16!!
:)
Driver: jBEAM Glorious 10.5* + Motore VT 7.0x, 45.5", Superstroke.
HY: Fourteen UT716 1i/3i/5i + Thump h90x, 39"-42", Superstroke.
Irons: OnOff Forged 6i - PW + Accra Tour 110 Ti Mesh, Superstroke.
Wedges: Epon Tour 51*/57* + Accra Tour 110/125 Ti Mesh, Superstroke.
Putter: Rife Barbados, Garsen.